Get a Crooked or Stuck Door Checked
Restore Garage Door provides garage door off track repair across Denver metro. If your door hangs at an angle or a roller has left its track, stop using it. We check the damage, find the cause, and explain what is needed to restore proper movement.

Signs Your Door May Be Off Track
The tracks guide the rollers as your door opens and closes. When a roller comes out or a track becomes damaged, the door can lose support and get stuck.
Look for these signs from a safe distance:
- A roller sitting outside the metal track.
- One side of the door hanging lower.
- A visible bend or gap in the track.
- The door catching or scraping on one side.
- A door stuck at an angle.
A crooked door does not always mean the track is the only problem. A cable or spring fault can also affect how the door hangs.
Why Did the Door Come Off Track?
A bump from a car, worn roller, or loose track support can affect the door’s path. Trouble with the lifting system can also pull the door unevenly.
| Possible cause | What needs a check |
|---|---|
| Impact from a car or object | Tracks, panels, hinges, and rollers near the damage |
| Worn or broken roller | The roller, its hinge, and the surrounding track |
| Loose track support | Brackets, fasteners, and track alignment |
| Uneven lifting | Cables, drums, and springs |
Finding the cause matters. Moving a roller back into place without fixing the underlying problem can allow it to happen again.
What the Repair May Include
The first step is to check how the door is supported and which parts are damaged. The proposed work depends on what caused the door to leave its track.
Repair may involve:
- Returning displaced rollers to the track.
- Correcting track alignment.
- Securing loose track supports.
- Replacing damaged track sections or rollers.
- Addressing related cable or lifting problems.
You can review the findings and cost before approving the work. After the repair, the door’s movement and alignment are checked.
Related services include roller replacement and cable repair.
Can a Bent Track Be Repaired?
Some alignment problems can be corrected without replacing the track. A track with a sharp bend, split, or major damage may need replacement.
The condition of nearby parts matters too. If a car hit the door, a panel or hinge may also be damaged. Fixing the track alone may not be enough.
For damage to a door section, see panel replacement.
Do Not Force the Door Back Into Place
An off track door can shift or fall. Do not stand beneath it, push on it, or try to guide a roller back by hand.
Until the door has been checked:
- Stop using the opener.
- Keep people, pets, and cars clear.
- Do not loosen tracks, brackets, or cables.
- Do not pull the emergency release.
- Leave the door in its current position.
When requesting service, mention if the door is partly open or blocking access to your garage.
Does an Off Track Door Need to Be Replaced?
Not always. If the door sections and lifting system are in suitable condition, repair may be enough.
Replacement may be worth considering when the door has major damage across several parts. A check of the whole door helps you compare the options.
Request Off Track Repair in Denver Metro
Tell Restore Garage Door what happened and whether the door is crooked, partly open, or stuck shut. Include your address and an optional photo taken from a safe distance.
For other door problems, visit our garage door repair page.