A Loose Cable Needs a Closer Look
Restore Garage Door provides garage door cable repair and replacement across Denver metro. If a cable has snapped, come loose, or started to fray, stop using the door. We check the cables and lifting parts to find the cause and explain the repair.

Signs of a Cable Problem
Cables work with the spring system to help lift and lower your door. When a cable fails or slips out of place, the door may lose support on one side.
You may notice:
- Loose cable hanging beside the door.
- Frayed wires or visible cable damage.
- One side of the door sitting lower than the other.
- A door that catches or stops as it moves.
- Cable tangled near the top of the door.
A crooked door can have more than one cause. The cables, springs, rollers, and tracks need a check before choosing a repair.
Find Out Why the Cable Came Loose
Putting a cable back in place may not solve the problem. A broken spring, damaged drum, or door that binds can affect cable tension.
The cable drum is the grooved part that winds the cable as the door moves. Damage or trouble elsewhere in the system can keep the cable from winding properly.
A service check helps identify what failed and whether nearby parts also need attention. Related services include spring repair and off track repair.
Does the Cable Need to Be Replaced?
A frayed or snapped cable needs replacement. A cable that has slipped out of place needs a check for damage before it can be used again.
| Cable condition | What needs to be checked |
|---|---|
| Frayed or broken | The correct replacement and the cause of the damage |
| Loose or off the drum | Cable condition, spring tension, and door movement |
| Tangled or kinked | Damage to the cable, drum, and nearby parts |
| One cable has failed | The condition of the cable on the other side |
Replacement cables must match the door and lifting system. Both sides need a look, even when the damage appears limited to one cable.
What to Expect From the Repair
The visit starts with a check of the damaged cable and the parts that support the door. You can review the findings, proposed work, and cost before deciding how to proceed.
Once the work is approved, damaged cables are replaced and any related issues included in the repair are addressed. Door balance and movement are then checked.
The cost depends on the cable type, door setup, and any damage to other parts. A photo can help show the problem, but a visit may be needed to confirm the full repair.
Leave the Door in Place
Do not pull on a loose cable or try to wind it back onto the drum. Cables and their brackets can be under strong tension.
If the door is crooked, partly open, or has visible cable damage:
- Stop using the opener.
- Keep people and pets away.
- Do not force the door up or down.
- Do not loosen cable brackets.
- Do not pull the emergency release.
Tell us whether the door is stuck open or closed when you request service.
Questions About Cable Repair
Sometimes, but both cables need to be inspected. If they have similar wear, replacing the pair may make sense. The recommendation depends on their condition and the door setup.
Not always. A broken spring can cause a cable to lose tension, but drum damage or uneven door movement can also be involved. Checking the system helps identify the cause.
Request Cable Repair in Denver Metro
Get help with a loose or broken cable from Restore Garage Door. Include your address, what you noticed, and whether the door is hanging unevenly.
If you are unsure which part has failed, describe the problem. You can also find related services on our garage door repair page.